Pouch Cell Vacuum Pre-Sealing Machine

This equipment can be used in the vacuum pre-sealing process of Polymer Pouch lithium batteries. This machine has a compact design and can be placed in a glove box for use, and can realize vacuuming and heating sealing functions. The equipment has good vacuum maintenance in the working chamber, high-quality sealing effect, and good flatness of the finished battery.

Pouch Cell vacuum Sealing Machine for Pre-Sealing Aftr electrolyte Injection

vacuum sealing

MR-YF200

* Suitable for pre-sealing process of small and medium-sized polymer pouch lithium-ion batteries;


	The vacuum degree can be adjusted up to -95Kpa (the buyer shall provide the vacuum pump);
	Room temperature-250 degree , temperature adjustable;
	±2 degree ;
	0-7Kg/cm2 adjustable;
	0-99 seconds adjustable;
	5±0.4mm (can be customized)
	200mm (can be customized, such as 300/400/500mm sealing length)
	60~300um
	<15um
	About 0.2L compressed gas per seal once.
	Greater than or equal to 180 times/h
	Using 300w heating tube, the power consumption when heating is about 0.6KW.
	220V/50Hz;
	0.5-0.8Mpa; When used in the glove box, the cylinder power source must use the same working gas used in the glove box;
	470mm485mm435mm;
	420mm325mm225mm
	About 50Kg

vacuum sealing machine with control system

factory

customer show

Pouch Cell Machine

Etiqueta: pouch cell vacuum pre-sealing machine, China pouch cell vacuum pre-sealing machine manufacturers, suppliers, factory